Okay so I grabbed a 3rd USB cable and it now shows up in the flasher (looks like i need to order new cables). However I get this error now for both.
Using ‘COM4’ as serial port.
Connecting…__
Detecting chip type… ESP32
Connecting…
Chip Info:
- Chip Family: ESP32
- Chip Model: ESP32D0WDQ6 (revision 1)
- Number of Cores: 2
- Max CPU Frequency: 240MHz
- Has Bluetooth: YES
- Has Embedded Flash: NO
- Has Factory-Calibrated ADC: YES
- MAC Address: XXXXXXXXXXXXXXXXXX
Uploading stub…
Running stub…
Stub running…
Changing baud rate to 460800
Changed. - Flash Size: 4MB
Unexpected error: The firmware binary is invalid (magic byte=50, should be E9)