SOS!! Can anyone with code debug experience help me save thisT-Beam…
Bluetooth and serial com works, does send GPS log. Power shown on Node info = 0%
Screen failed after firmware updates via Web serial connection. Thanks.
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (842) esp_core_dump_flash: No core dum ѥѥ found!
E (842) esp_core_dump_flash: No core dump partition found!
[ 12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[ 464][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
@INFO | ??:??:?? 0
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (487424/1048576 Bytes):
DEBUG | ??:??:?? 0 /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_Black.svg.gz (602 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_White.svg.gz (610 Bytes)
DEBUG | ??:??:?? 0 /static/apple-touch-icon.png.gz (3164 Bytes)
DEBUG | ??:??:?? 0 /static/favicon.ico.gz (2270 Bytes)
DEBUG | ??:??:?? 0 /static/icon.svg.gz (852 Bytes)
DEBUG | ??:??:?? 0 /static/index-CGqDWSD_.js.gz (348 Bytes)
DEBUG | ??:??:?? 0 /static/index-D5d-WaNC.css.gz (16236 Bytes)
DEBUG | ??:??:?? 0 /static/index-nsbd6Oaw.js.gz (205708 Bytes)
DEBUG | ??:??:?? 0 /static/index.html.gz (547 Bytes)
DEBUG | ??:??:?? 1 /static/maplibre-gl-BSf4l8UU.js.gz (210198 Bytes)
DEBUG | ??:??:?? 1 /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 1 /static/site.webmanifest.gz (197 Bytes)
[ 1096][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
[ 1098][I][XPowersCommon.tpp:248] begin(): SDA:21 SCL:22
[ 1102][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
WARN | ??:??:?? 2 Failed to find AXP2101 power management
[ 2111][I][XPowersAXP2101.tpp:230] ~XPowersAXP2101(): ~XPowersAXP2101
[ 2111][I][XPowersCommon.tpp:248] begin(): SDA:21 SCL:22
[ 2115][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
WARN | ??:??:?? 3 Failed to find AXP192 power management
[ 3125][I][XPowersAXP192.tpp:186] ~XPowersAXP192(): ~XPowersAXP192
[ 3126][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
INFO | ??:??:?? 3 Scanning for i2c devices...
[ 3144][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 3 Scanning for i2c devices on port 1
INFO | ??:??:?? 129 No I2C devices found
DEBUG | ??:??:?? 129 acc_info = 0
INFO | ??:??:?? 129 Meshtastic hwvendor=4, swver=2.3.3.8187fa7
DEBUG | ??:??:?? 129 Setting random seed 2139043658
DEBUG | ??:??:?? 129 Total heap: 192868
DEBUG | ??:??:?? 129 Free heap: 159464
DEBUG | ??:??:?? 129 Total PSRAM: 4192107
DEBUG | ??:??:?? 129 Free PSRAM: 4191847
DEBUG | ??:??:?? 129 NVS: UsedEntries 0, FreeEntries 630, AllEntries 630, NameSpaces 0
DEBUG | ??:??:?? 129 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 129 Number of Device Reboots: 1
DEBUG | ??:??:?? 129 OTA firmware version 0.2.1.33451a5
INFO | ??:??:?? 129 Initializing NodeDB
[129207][E][vfs_api.cpp:105] open(): /littlefs/prefs/db.proto does not exist, no permits for creation
INFO | ??:??:?? 129 No /prefs/db.proto preferences found
INFO | ??:??:?? 129 Installing default DeviceState
DEBUG | ??:??:?? 129 Initial packet id 312954274, numPacketId 4294967295
DEBUG | ??:??:?? 129 Using nodenum 0xe0f6f80c
[129242][E][vfs_api.cpp:105] open(): /littlefs/prefs/config.proto does not exist, no permits for creation
INFO | ??:??:?? 129 No /prefs/config.proto preferences found
INFO | ??:??:?? 129 Installing default LocalConfig
INFO | ??:??:?? 129 Setting default channel and radio preferences!
DEBUG | ??:??:?? 129 Expanding short PSK #1
INFO | ??:??:?? 129 Wanted region 0, using UNSET
[129272][E][vfs_api.cpp:105] open(): /littlefs/prefs/module.proto does not exist, no permits for creation
INFO | ??:??:?? 129 No /prefs/module.proto preferences found
INFO | ??:??:?? 129 Installing default ModuleConfig
[129292][E][vfs_api.cpp:105] open(): /littlefs/prefs/channels.proto does not exist, no permits for creation
INFO | ??:??:?? 129 No /prefs/channels.proto preferences found
INFO | ??:??:?? 129 Installing default ChannelFile
[129311][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 129 No /oem/oem.proto preferences found
DEBUG | ??:??:?? 129 cleanupMeshDB purged 0 entries
DEBUG | ??:??:?? 129 Using nodenum 0xe0f6f80c
DEBUG | ??:??:?? 129 Number of Device Reboots: 1
INFO | ??:??:?? 129 Setting default channel and radio preferences!
DEBUG | ??:??:?? 129 Expanding short PSK #1
INFO | ??:??:?? 129 Wanted region 0, using UNSET
INFO | ??:??:?? 129 Saving /prefs/db.proto
[129611][E][vfs_api.cpp:105] open(): /littlefs/prefs/db.proto does not exist, no permits for creation
INFO | ??:??:?? 129 Saving /prefs/channels.proto
[129658][E][vfs_api.cpp:105] open(): /littlefs/prefs/channels.proto does not exist, no permits for creation
DEBUG | ??:??:?? 129 Using GPIO38 for button
DEBUG | ??:??:?? 129 SPI.begin(SCK=5, MISO=19, MOSI=27, NSS=18)
DEBUG | ??:??:?? 129 Read RTC time as 129
INFO | ??:??:?? 129 Setting GPS power=1
DEBUG | ??:??:?? 129 WANT GPS=1
INFO | ??:??:?? 129 Setting GPS power=1
DEBUG | ??:??:?? 129 Using GPIO34 for GPS RX
DEBUG | ??:??:?? 129 Using GPIO12 for GPS TX
DEBUG | ??:??:?? 129 NeighborInfoModule is disabled
INFO | ??:??:?? 129 External Notification Module Disabled
ERROR | ??:??:?? 129 NOTE! Recording critical error 6 at src/main.cpp:684
DEBUG | ??:??:?? 129 RF95Interface(cs=18, irq=26, rst=23, busy=33)
INFO | ??:??:?? 129 Starting meshradio init...
DEBUG | ??:??:?? 129 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 129 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO | ??:??:?? 129 Radio freq=906.875, config.lora.frequency_offset=0.000
INFO | ??:??:?? 129 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30
INFO | ??:??:?? 129 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)
INFO | ??:??:?? 129 Radio myRegion->numChannels: 104 x 250.000kHz
INFO | ??:??:?? 129 Radio channel_num: 20
INFO | ??:??:?? 129 Radio frequency: 906.875000
INFO | ??:??:?? 129 Slot time: 42 msec
INFO | ??:??:?? 129 Set radio: final power level=20
INFO | ??:??:?? 129 RF95 init result -2
INFO | ??:??:?? 129 Frequency set to 906.875000
INFO | ??:??:?? 129 Bandwidth set to 250.000000
INFO | ??:??:?? 129 Power output set to 20
WARN | ??:??:?? 129 Failed to find RF95 radio
DEBUG | ??:??:?? 129 SX126xInterface(cs=18, irq=33, rst=23, busy=32)
DEBUG | ??:??:?? 129 SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
INFO | ??:??:?? 129 Starting meshradio init...
DEBUG | ??:??:?? 129 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 130 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO | ??:??:?? 130 Radio freq=906.875, config.lora.frequency_offset=0.000
INFO | ??:??:?? 130 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30
INFO | ??:??:?? 130 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)
INFO | ??:??:?? 130 Radio myRegion->numChannels: 104 x 250.000kHz
INFO | ??:??:?? 130 Radio channel_num: 20
INFO | ??:??:?? 130 Radio frequency: 906.875000
INFO | ??:??:?? 130 Slot time: 42 msec
INFO | ??:??:?? 130 Set radio: final power level=22
INFO | ??:??:?? 130 SX126x init result 0
INFO | ??:??:?? 130 Frequency set to 906.875000
INFO | ??:??:?? 130 Bandwidth set to 250.000000
INFO | ??:??:?? 130 Power output set to 22
DEBUG | ??:??:?? 130 Current limit set to 140.000000
DEBUG | ??:??:?? 130 Current limit set result 0
DEBUG | ??:??:?? 130 Setting DIO2 as RF switch
DEBUG | ??:??:?? 130 SX126X_RXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 130 SX126X_TXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 130 Using MCU pin -1 as RXEN and pin -1 as TXEN to control RF switching
INFO | ??:??:?? 130 Set RX gain to boosted mode; result: 0
INFO | ??:??:?? 130 SX1262 Radio init succeeded, using SX1262 radio
INFO | ??:??:?? 130 Not using WIFI
DEBUG | ??:??:?? 130 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
DEBUG | ??:??:?? 130 LoRA bitrate = 118.500000 bytes / sec
INFO | ??:??:?? 130 PowerFSM init, USB power=1
DEBUG | ??:??:? * ѕɁstate: BOOT
[130198][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 320 / 4 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 130 [GPS] Probing for GPS at 9600
INFO | ??:??:?? 131 [GPS] Found a UBlox Module using baudrate 9600
DEBUG | ??:??:?? 131 [GPS] Module Info :
DEBUG | ??:??:?? 131 [GPS] Soft version: EXT CORE 3.01 (107900)
DEBUG | ??:??:?? 131 [GPS] Hard version: 00080000
DEBUG | ??:??:?? 131 [GPS] Extensions:7
DEBUG | ??:??:?? 131 [GPS] ROM BASE 3.01 (107888)
DEBUG | ??:??:?? 131 [GPS] FWVER=SPG 3.01
DEBUG | ??:??:?? 131 [GPS] PROTVER=18.00
DEBUG | ??:??:?? 131 [GPS] MOD=NEO-M8N-0
DEBUG | ??:??:?? 131 [GPS] FIS=0xEF4015 (100111)
DEBUG | ??:??:?? 131 [GPS] GPS;GLO;GAL;BDS
DEBUG | ??:??:?? 131 [GPS] SBAS;IMES;QZSS
DEBUG | ??:??:?? 131 [GPS] Protocol Version:18.00
DEBUG | ??:??:?? 131 [GPS] ProtVer=18
INFO | ??:??:?? 131 [GPS] UBlox GNSS probe succeeded, using UBlox NEO-M8N-0 GNSS Module
INFO | ??:??:?? 132 [GPS] GNSS configured for GPS+SBAS+GLONASS+Galileo. Pause for 0.75s before sending next command.
INFO | ??:??:?? 133 [GPS] GNSS module configuration saved!
WARN | ??:??:?? 133 [GPS] GPS FactoryReset requested
INFO | ??:??:?? 165 [GPS] Saving /prefs/db.proto
DEBUG | ??:??:?? 165 [GPS] NMEA GPS time 2024-04-06 18:46:31
DEBUG | ??:??:?? 165 [GPS] Upgrading time to quality 4
DEBUG | 18:46:31 165 [GPS] Read RTC time as 1712429191
WARN | 18:46:31 165 [GPS] 1 new GPS checksum failures, for a total of 1.
DEBUG | 18:46:31 165 [GPS] hasValidLocation RISING EDGE
DEBUG | 18:46:31 165 [GPS] WANT GPS=0
DEBUG | 18:46:31 165 [GPS] GPS Lock took 35, average 0
INFO | 18:46:31 165 [GPS] Setting GPS power=0
DEBUG | 18:46:31 165 [GPS] Sleep Time: 120000
DEBUG | 18:46:31 165 [GPS] publishing pos@66119887:2, hasVal=1, Sats=6, GPSlock=1
DEBUG | 18:46:31 165 [GPS] New GPS pos@66119887:3 lat=38.663639, lon=-120.780207, alt=680, pdop=2.35, track=0.00, speed=0.00, sats=6
DEBUG | 18:46:31 165 [GPS] onGPSChanged() pos@66119887, time=1712429191, lat=386636390, lon=-1207802066, alt=680
INFO | 18:46:31 165 [GPS] updatePosition LOCAL pos@66119887, time=1712429191, latI=386636390, lonI=-1207802066, alt=680
DEBUG | 18:46:31 165 [GPS] Setting local position: latitude=386636390, longitude=-1207802066, time=1712429191
DEBUG | 18:46:31 165 [GPS] Node status update: 1 online, 1 total
INFO | 18:46:31 165 [GPS] Sending smart pos@66119887:6 to mesh (distanceTraveled=12616525.000000m, minDistanceThreshold=100m, timeElapsed=165518ms)
DEBUG | 18:46:31 165 [GPS] Sending location with precision 32
INFO | 18:46:31 165 [GPS] Providing time to mesh 1712429191
INFO | 18:46:31 165 [GPS] Position reply: time=1712429191, latI=386636390, lonI=-1207802066
DEBUG | 18:46:31 165 [GPS] Update DB node 0xe0f6f80c, rx_time=1712429191
DEBUG | 18:46:31 165 [GPS] handleReceived(LOCAL) (id=0x12a74da5 fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=3 WANTRESP rxtime=1712429191 priority=10)
hopStart=3 priority=10)