I am trying to install firmware V2.1.19.eb7025f beta to T-Beam with M8N & SX1262 using web Flasher. I selected device as T Beam and wipe and reinstall device option. Install is successful, but Tbeam display is crashing/no display and TBeam resets frequently. Any pointers to what I am missing would be appreciated. Below is device logs
�F��0��!!a!�DEBUG | 11:48:13 7 [PowerFSM] Enter state: POWER
INFO | 11:48:13 7 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | 11:48:30 24 [Power] Battery: usbPower=1, isCharging=0, batMv=0, batPct=0
INFO | 11:48:40 33 [NodeInfoModule] Sending our nodeinfo to mesh (wantReplies=1)
INFO | 11:48:40 33 [NodeInfoModule] sending owner !dadfbb1c/Meshtastic bb1c/bb1c
DEBUG | 11:48:40 33 [NodeInfoModule] Initial packet id 1634852401, numPacketId 4294967295
DEBUG | 11:48:40 33 [NodeInfoModule] Update DB node 0xdadfbb1c, rx_time=1690804120, channel=0
DEBUG | 11:48:40 33 [NodeInfoModule] handleReceived(LOCAL) (id=0x6171de33 fr=0x1c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=4 WANTRESP rxtime=1690804120 priority=10)
DEBUG | 11:48:40 33 [NodeInfoModule] No modules interested in portnum=4, src=LOCAL
DEBUG | 11:48:40 33 [NodeInfoModule] localSend to channel 0
DEBUG | 11:48:40 33 [NodeInfoModule] Add packet record (id=0x6171de33 fr=0x1c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=4 WANTRESP rxtime=1690804120 priority=10)
DEBUG | 11:48:40 33 [NodeInfoModule] Expanding short PSK #1
DEBUG | 11:48:40 33 [NodeInfoModule] Using AES128 key!
DEBUG | 11:48:40 33 [NodeInfoModule] ESP32 crypt fr=dadfbb1c, num=6171de33, numBytes=50!
DEBUG | 11:48:40 33 [NodeInfoModule] enqueuing for send (id=0x6171de33 fr=0x1c to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted rxtime=1690804120 priority=10)
DEBUG | 11:48:40 33 [NodeInfoModule] txGood=0,rxGood=0,rxBad=0
E (150246) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
E (150246) task_wdt: - loopTask (CPU 1)
E (150246) task_wdt: Tasks currently running:
E (150246) task_wdt: CPU 0: IDLE
E (150246) task_wdt: CPU 1: loopTask
E (150246) task_wdt: Aborting.
abort() was called at PC 0x4014cc18 on core 0
Backtrace: 0x400845ed:0x3ffbf71c |<-CORRUPTED
ELF file SHA256: 441a348a391c4087
E (26557) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting…
ets Jul 29 2019 12:21:46
rst:0xc (SW_CPU_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (850) esp_core_dump_flash: No core dump ��ѥѥ���found!
E (850) esp_core_dump_flash: No core dump partition found!
[ 12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[ 464][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
�� @INFO | ??:??:?? 0
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (479232/1048576 Bytes):
DEBUG | ??:??:?? 0 /prefs/channels.proto (53 Bytes)
DEBUG | ??:??:?? 0 /prefs/config.proto (96 Bytes)
DEBUG | ??:??:?? 0 /prefs/db.proto (136 Bytes)
DEBUG | ??:??:?? 0 /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_Black.svg.gz (592 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_White.svg.gz (600 Bytes)
DEBUG | ??:??:?? 0 /static/apple-touch-icon.png.gz (3162 Bytes)
DEBUG | ??:??:?? 0 /static/favicon.ico.gz (2221 Bytes)
DEBUG | ??:??:?? 0 /static/icon.svg.gz (842 Bytes)
DEBUG | ??:??:?? 0 /static/index-81905446.js.gz (399969 Bytes)
DEBUG | ??:??:?? 0 /static/index-9602d760.css.gz (17494 Bytes)
DEBUG | ??:??:?? 0 /static/index-fc2e9253.js.gz (347 Bytes)
DEBUG | ??:??:?? 0 /static/index.html.gz (548 Bytes)
DEBUG | ??:??:?? 0 /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 0 /static/site.webmanifest.gz (196 Bytes)
[ 840][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
[ 841][I][XPowersCommon.tpp:248] begin(): SDA:21 SCL:22
[ 846][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
WARN | ??:??:?? 0 Failed to find AXP2101 power management
[ 864][I][XPowersAXP2101.tpp:230] ~XPowersAXP2101(): ~XPowersAXP2101
[ 865][I][XPowersCommon.tpp:248] begin(): SDA:21 SCL:22
[ 869][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
INFO | ??:??:?? 0 AXP192 PMU init succeeded, using AXP192 PMU
[ 895][D][XPowersAXP192.tpp:2010] setInterruptImpl(): setInterruptImpl DISABLE - 0xffffffffff
DEBUG | ??:??:?? 0 =======================================================================
DEBUG | ??:??:?? 0 DC1 : + Voltage:3300 mV
DEBUG | ??:??:?? 0 DC2 : - Voltage:1800 mV
DEBUG | ??:??:?? 0 DC3 : + Voltage:3300 mV
DEBUG | ??:??:?? 0 LDO2 : + Voltage:3300 mV
DEBUG | ??:??:?? 0 LDO3 : + Voltage:3300 mV
DEBUG | ??:??:?? 0 =======================================================================
DEBUG | ??:??:?? 0 Battery: usbPower=1, isCharging=0, batMv=0, batPct=0
INFO | ??:??:?? 0 Scanning for i2c devices…
[ 944][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for i2c devices on port 1
DEBUG | ??:??:?? 0 I2C device found at address 0x34
INFO | ??:??:?? 0 axp192/axp2101 PMU found
INFO | ??:??:?? 0 1 I2C devices found
DEBUG | ??:??:?? 0 acc_info = 0
INFO | ??:??:?? 0 Meshtastic hwvendor=4, swver=2.1.19.eb7025f
DEBUG | ??:??:?? 0 Setting random seed 1338506133
DEBUG | ??:??:?? 0 Total heap: 172540
DEBUG | ??:??:?? 0 Free heap: 138280
DEBUG | ??:??:?? 0 Total PSRAM: 4192107
DEBUG | ??:??:?? 0 Free PSRAM: 4191847
DEBUG | ??:??:?? 1 NVS: UsedEntries 90, FreeEntries 540, AllEntries 630, NameSpaces 3
DEBUG | ??:??:?? 1 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 1 Number of Device Reboots: 12
DEBUG | ??:??:?? 1 OTA firmware version 0.2.1.2fbe7fc
INFO | ??:??:?? 1 Initializing NodeDB
INFO | ??:??:?? 1 Loading /prefs/db.proto
INFO | ??:??:?? 1 Loaded saved devicestate version 20
INFO | ??:??:?? 1 Loading /prefs/config.proto
INFO | ??:??:?? 1 Loaded saved config version 20
[ 1059][E][vfs_api.cpp:105] open(): /littlefs/prefs/module.proto does not exist, no permits for creation
INFO | ??:??:?? 1 No /prefs/module.proto preferences found
INFO | ??:??:?? 1 Installing default ModuleConfig
INFO | ??:??:?? 1 Loading /prefs/channels.proto
INFO | ??:??:?? 1 Loaded saved channelFile version 20
[ 1088][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 1 No /oem/oem.proto preferences found
DEBUG | ??:??:?? 1 Number of Device Reboots: 12
DEBUG | ??:??:?? 1 Expanding short PSK #1
INFO | ??:??:?? 1 Wanted region 10, using IN
DEBUG | ??:??:?? 1 region=10, NODENUM=0xdadfbb1c, dbsize=0
INFO | ??:??:?? 1 Saving /prefs/db.proto
DEBUG | ??:??:?? 1 Read RTC time as 1690804212
DEBUG | ??:??:?? 1 Using MSL altitude model
INFO | ??:??:?? 1 Setting GPS power=1
DEBUG | ??:??:?? 1 WANT GPS=1
DEBUG | ??:??:?? 1 Using GPIO34 for GPS RX
DEBUG | ??:??:?? 1 Using GPIO12 for GPS TX
DEBUG | ??:??:?? 2 Module Info :
DEBUG | ??:??:?? 2 Soft version: XT CORE 3.01 (107900)
DEBUG | ??:??:?? 2 first char is X
DEBUG | ??:??:?? 2 Hard version: 00080000
DEBUG | ??:??:?? 2 Extensions:7
DEBUG | ??:??:?? 2 ROM BASE 2.01 (75331)
DEBUG | ??:??:?? 2 FWVER=SPG 3.01
DEBUG | ??:??:?? 2 PROTVER=18.00
DEBUG | ??:??:?? 2 MOD=NEO-M8N-0
DEBUG | ??:??:?? 2 FIS=0xEF4015 (100111)
DEBUG | ??:??:?? 2 GPS;GLO;GAL;BDS
DEBUG | ??:??:?? 2 SBAS;IMES;QZSS
DEBUG | ??:??:?? 2 Protocol Version:18.00
DEBUG | ??:??:?? 2 ProtVer=18
INFO | ??:??:?? 2 UBlox GNSS init succeeded, using UBlox NEO-M8N-0 GNSS Module
INFO | ??:??:?? 3 GNSS configured for GPS+SBAS+GLONASS. Pause for 0.75s before sending next command.
DEBUG | ??:??:?? 4 GxGSA NOT available
INFO | ??:??:?? 4 External Notification Module Disabled
WARN | ??:??:?? 4 RF95Interface(cs=18, irq=26, rst=23, busy=33)
INFO | ??:??:?? 4 Starting meshradio init…
DEBUG | ??:??:?? 4 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 4 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=253, time 3246 ms
INFO | ??:??:?? 4 Radio freq=865.875, config.lora.frequency_offset=0.000
INFO | ??:??:?? 4 Set radio: region=IN, name=LongFast, config=0, ch=3, power=30
INFO | ??:??:?? 4 Radio myRegion->freqStart → myRegion->freqEnd: 865.000000 → 867.000000 (2.000000 mhz)
INFO | ??:??:?? 4 Radio myRegion->numChannels: 8 x 250.000kHz
INFO | ??:??:?? 4 Radio channel_num: 4
INFO | ??:??:?? 4 Radio frequency: 865.875000
INFO | ??:??:?? 4 Slot time: 42 msec
INFO | ??:??:?? 4 Set radio: final power level=20
INFO | ??:??:?? 4 RF95 init result -2
INFO | ??:??:?? 4 Frequency set to 865.875000
INFO | ??:??:?? 4 Bandwidth set to 250.000000
INFO | ??:??:?? 4 Power output set to 20
WARN | ??:??:?? 4 Failed to find RF95 radio
WARN | ??:??:?? 4 SX126xInterface(cs=18, irq=33, rst=23, busy=32)
INFO | ??:??:?? 4 Starting meshradio init…
DEBUG | ??:??:?? 4 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 4 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=253, time 3246 ms
INFO | ??:??:?? 4 Radio freq=865.875, config.lora.frequency_offset=0.000
INFO | ??:??:?? 4 Set radio: region=IN, name=LongFast, config=0, ch=3, power=30
INFO | ??:??:?? 4 Radio myRegion->freqStart → myRegion->freqEnd: 865.000000 → 867.000000 (2.000000 mhz)
INFO | ??:??:?? 4 Radio myRegion->numChannels: 8 x 250.000kHz
INFO | ??:??:?? 4 Radio channel_num: 4
INFO | ??:??:?? 4 Radio frequency: 865.875000
INFO | ??:??:?? 4 Slot time: 42 msec
INFO | ??:??:?? 4 Set radio: final power level=22
INFO | ??:??:?? 4 SX126x init result 0
INFO | ??:??:?? 4 Frequency set to 865.875000
INFO | ??:??:?? 4 Bandwidth set to 250.000000
INFO | ??:??:?? 4 Power output set to 22
DEBUG | ??:??:?? 4 Current limit set to 140.000000
DEBUG | ??:??:?? 4 Current limit set result 0
DEBUG | ??:??:?? 4 SX126X_E22 mode enabled. Setting DIO2 as RF Switch
INFO | ??:??:?? 4 Set Rx Power Saving Gain mode; result: 0
INFO | ??:??:?? 4 SX1262 Radio init succeeded, using SX1262 radio
INFO | ??:??:?? 4 Not using WIFI
DEBUG | ??:??:?? 4 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=237, time 3057 ms
DEBUG | ??:??:?? 4 LoRA bitrate = 77.526985 bytes / sec
INFO | ??:??:?? 4 PowerFSM i�f�� USB power=1
DEBUG | ??:??:?? 4 Enter state: BOOT
[ 4860][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 320 / 4 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 4 [Power] Battery: usbPower=1, isCharging=0, batMv=0, batPct=0
DEBUG | ??:??:?? 4 [GPS] NMEA GPS time 2023-07-31 11:50:16
DEBUG | 11:50:15 4 [GPS] Upgrading time to RTC 1690804216 secs (quality 4)
DEBUG | 11:50:16 4 [GPS] Read RTC time as 1690804216
DEBUG | 11:50:16 4 [GPS] publishing pos@0:2, hasVal=0, GPSlock=0
DEBUG | 11:50:16 4 [GPS] No GPS lock
DEBUG | 11:50:16 4 [GPS] onGPSChanged() pos@0, time=1690804216, lat=0, lon=0, alt=0
INFO | 11:50:16 4 [GPS] updatePosition LOCAL pos@0, time=1690804216, latI=0, lonI=0, alt=0
DEBUG | 11:50:16 5 [GPS] Node status update: 1 online, 1 total
INFO | 11:50:16 5 [RangeTestModule] Range Test Module - Disabled
DEBUG | 11:50:18 7 [PowerFSM] Enter state: POWER
INFO | 11:50:18 7 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | 11:50:35 24 [Power] Battery: usbPower=1, isCharging=0, batMv=0, batPct=0
INFO | 11:50:45 34 [NodeInfoModule] Sending our nodeinfo to mesh (wantReplies=1)
INFO | 11:50:45 34 [NodeInfoModule] sending owner !dadfbb1c/Meshtastic bb1c/bb1c
DEBUG | 11:50:45 34 [NodeInfoModule] Initial packet id 690443043, numPacketId 4294967295
DEBUG | 11:50:45 34 [NodeInfoModule] Update DB node 0xdadfbb1c, rx_time=1690804245, channel=0
DEBUG | 11:50:45 34 [NodeInfoModule] handleReceived(LOCAL) (id=0x29275325 fr=0x1c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=4 WANTRESP rxtime=1690804245 priority=10)
DEBUG | 11:50:45 34 [NodeInfoModule] No modules interested in portnum=4, src=LOCAL
DEBUG | 11:50:45 34 [NodeInfoModule] localSend to channel 0
DEBUG | 11:50:45 34 [NodeInfoModule] Add packet record (id=0x29275325 fr=0x1c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=4 WANTRESP rxtime=1690804245 priority=10)
DEBUG | 11:50:45 34 [NodeInfoModule] Expanding short PSK #1
DEBUG | 11:50:45 34 [NodeInfoModule] Using AES128 key!
DEBUG | 11:50:45 34 [NodeInfoModule] ESP32 crypt fr=dadfbb1c, num=29275325, numBytes=50!
DEBUG | 11:50:45 34 [NodeInfoModule] enqueuing for send (id=0x29275325 fr=0x1c to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted rxtime=1690804245 priority=10)
DEBUG | 11:50:45 34 [NodeInfoModule] txGood=0,rxGood=0,rxBad=0
E (152598) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
E (152598) task_wdt: - loopTask (CPU 1)
E (152598) task_wdt: Tasks currently running:
E (152598) task_wdt: CPU 0: IDLE
E (152598) task_wdt: CPU 1: loopTask
E (152598) task_wdt: Aborting.
abort() was called at PC 0x4014cc18 on core 0
Backtrace: 0x400845ed:0x3ffbf71c |<-CORRUPTED
ELF file SHA256: 441a348a391c4087
E (28341) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting…
ets Jul 29 2019 12:21:46