Has anyone had any luck using any gpio on the RAK 5005-O base board working with the detection module? RAK5005-O WisBlock Base Board Datasheet | RAKwireless Documentation Center indicatesi io1 and io2 in J11 are available but i can’t even get a simple button press to be detected. I dont have any additional modules in any slots (e.g no gps in slot A). Io1 to ground reads 0.0v which is unexpected (is the board is messed up??). Io2 to ground reads 3.23v. Neither will trigger a detection; ive tried setting different pins in the app with no luck. Any insight would be appreciated. I do have some of tonyg’s micro gpio boards coming so i can overcome this prob on this board but am frustrated and wondering if i’m just missing something.
Maybe with a 40 pin module, there is no accessable GPIO on the 5005