Waveshare ESP32-S3-Pico (16 MB FLASH, 2 MB PSRAM)
Pico form factor ESP32-S3 module - provides
compatibility with Raspberry Pi PICO HAT’s (some issues when using multiple HAT’s)
Video
Bootlog
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x28 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x44c
load:0x403c9700,len:0xbe4
load:0x403cc700,len:0x2a38
entry 0x403c98d4
E (347) esp_core_dump_flash: No core dump partition found!
E (347) esp_core_dump_flash: No core dump partition found!
[ 574][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
��@INFO | ??:??:?? 0
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (16384/1048576 Bytes):
DEBUG | ??:??:?? 0 /prefs/channels.proto (53 Bytes)
DEBUG | ??:??:?? 0 /prefs/config.proto (92 Bytes)
DEBUG | ??:??:?? 0 /prefs/db.proto (198 Bytes)
DEBUG | ??:??:?? 0 /prefs/module.proto (109 Bytes)
[ 659][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=17 scl=18 freq=100000
[ 660][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=15 scl=16 freq=100000
DEBUG | ??:??:?? 0 Using analog input 7 for battery level
INFO | ??:??:?? 0 ADCmod: ADC characterization based on default reference voltage
INFO | ??:??:?? 0 Scanning for i2c devices...
[ 692][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for i2c devices on port 2
DEBUG | ??:??:?? 0 I2C device found at address 0x43
INFO | ??:??:?? 0 Device found at address 0x43 was not able to be enumerated
[ 1721][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 1 Scanning for i2c devices on port 1
DEBUG | ??:??:?? 1 I2C device found at address 0x5f
DEBUG | ??:??:?? 1 Wire.available() = 1
INFO | ??:??:?? 1 m5 cardKB found
DEBUG | ??:??:?? 2 I2C device found at address 0x76
DEBUG | ??:??:?? 2 Wire.available() = 1
INFO | ??:??:?? 2 BME-280 sensor found at address 0x76
INFO | ??:??:?? 3 2 I2C devices found
DEBUG | ??:??:?? 3 acc_info = 0
DEBUG | ??:??:?? 3 found i2c sensor meshtastic_TelemetrySensorType_BME280
INFO | ??:??:?? 3 Meshtastic hwvendor=255, swver=2.2.19.f9a8581e
DEBUG | ??:??:?? 3 Setting random seed 3144204547
DEBUG | ??:??:?? 3 Total heap: 280872
DEBUG | ??:??:?? 3 Free heap: 244504
DEBUG | ??:??:?? 3 Total PSRAM: 2095087
DEBUG | ??:??:?? 3 Free PSRAM: 2094827
DEBUG | ??:??:?? 3 NVS: UsedEntries 70, FreeEntries 560, AllEntries 630, NameSpaces 3
DEBUG | ??:??:?? 3 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 3 Number of Device Reboots: 109
ESP_ERROR_CHECK_WITHOUT_ABORT failed: esp_err_t 0x105 (ESP_ERR_NOT_FOUND) at 0x403809ff
file: "src/platform/esp32/BleOta.cpp" line 16
func: static const esp_partition_t* BleOta::findEspOtaAppPartition()
expression: esp_ota_get_partition_description(part, &app_desc)
ESP_ERROR_CHECK_WITHOUT_ABORT failed: esp_err_t 0x102 (ESP_ERR_INVALID_ARG) at 0x403809ff
file: "src/platform/esp32/BleOta.cpp" line 30
func: static String BleOta::getOtaAppVersion()
expression: esp_ota_get_partition_description(part, &app_desc)
DEBUG | ??:??:?? 3 No OTA firmware available
INFO | ??:??:?? 3 Initializing NodeDB
INFO | ??:??:?? 3 Loading /prefs/db.proto
INFO | ??:??:?? 3 Loaded saved devicestate version 22
INFO | ??:??:?? 3 Loading /prefs/config.proto
INFO | ??:??:?? 3 Loaded saved config version 22
INFO | ??:??:?? 3 Loading /prefs/module.proto
INFO | ??:??:?? 3 Loaded saved moduleConfig version 22
INFO | ??:??:?? 3 Loading /prefs/channels.proto
INFO | ??:??:?? 3 Loaded saved channelFile version 22
[ 3968][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 3 No /oem/oem.proto preferences found
DEBUG | ??:??:?? 3 cleanupMeshDB purged 0 entries
WARN | ??:??:?? 3 Using nodenum 0xe23dd7a8
DEBUG | ??:??:?? 3 Number of Device Reboots: 109
DEBUG | ??:??:?? 3 Expanding short PSK #1
INFO | ??:??:?? 3 Wanted region 3, using EU_868
DEBUG | ??:??:?? 3 region=3, NODENUM=0xe23dd7a8, dbsize=2
INFO | ??:??:?? 4 Saving /prefs/db.proto
WARN | ??:??:?? 4 SPI.begin(SCK=35, MISO=37, MOSI=36, NSS=14)
DEBUG | ??:??:?? 4 GEOMETRY_RAWMODE, 296, 128
DEBUG | ??:??:?? 4 Read RTC time as 3
DEBUG | ??:??:?? 4 Running without GPS.
DEBUG | ??:??:?? 4 NeighborInfoModule is disabled
[ 4116][E][vfs_api.cpp:105] open(): /littlefs/prefs/cannedConf.proto does not exist, no permits for creation
INFO | ??:??:?? 4 No /prefs/cannedConf.proto preferences found
INFO | ??:??:?? 4 CannedMessageModule is enabled
INFO | ??:??:?? 4 External Notification Module Disabled
INFO | ??:??:?? 4 Doing EInk init
INFO | ??:??:?? 4 Turning on screen
DEBUG | ??:??:?? 4 Updating E-Paper... _PowerOn : 96000
_Update_Full : 3857000
_Update_Part : 778000
_PowerOff : 141000
done
DEBUG | ??:??:?? 9 Module wants a UI Frame
WARN | ??:??:?? 9 SX126xInterface(cs=14, irq=4, rst=40, busy=13)
DEBUG | ??:??:?? 9 SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
INFO | ??:??:?? 9 Starting meshradio init...
DEBUG | ??:??:?? 9 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 9 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO | ??:??:?? 9 Radio freq=869.525, config.lora.frequency_offset=0.000
INFO | ??:??:?? 9 Set radio: region=EU_868, name=LongFast, config=0, ch=0, power=27
INFO | ??:??:?? 9 Radio myRegion->freqStart -> myRegion->freqEnd: 869.400024 -> 869.650024 (0.250000 mhz)
INFO | ??:??:?? 9 Radio myRegion->numChannels: 1 x 250.000kHz
INFO | ??:??:?? 9 Radio channel_num: 1
INFO | ??:??:?? 9 Radio frequency: 869.525024
INFO | ??:??:?? 9 Slot time: 42 msec
INFO | ??:??:?? 9 Set radio: final power level=22
INFO | ??:??:?? 9 SX126x init result 0
INFO | ??:??:?? 9 Frequency set to 869.525024
INFO | ??:??:?? 9 Bandwidth set to 250.000000
INFO | ??:??:?? 9 Power output set to 22
DEBUG | ??:??:?? 9 Current limit set to 140.000000
DEBUG | ??:??:?? 9 Current limit set result 0
DEBUG | ??:??:?? 9 Setting DIO2 as RF switch
DEBUG | ??:??:?? 9 SX126X_RXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 9 SX126X_TXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 9 Using MCU pin -1 as RXEN and pin -1 as TXEN to control RF switching
INFO | ??:??:?? 9 Set RX gain to boosted mode; result: 0
INFO | ??:??:?? 9 SX1262 Radio init succeeded, using SX1262 radio
INFO | ??:??:?? 9 Not using WIFI
DEBUG | ??:??:?? 9 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
DEBUG | ??:??:?? 9 LoRA bitrate = 118.500000 bytes / sec
INFO | ??:??:?? 9 PowerFSM init, USB power=1
DEBUG | ??:??:?? 9 Enter state: BOOT
[ 9472][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 6 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 9 [Power] Battery: usbPower=1, isCharging=1, batMv=4225, batPct=0
DEBUG | ??:??:?? 9 [Screen] Screen: Started...
DEBUG | ??:??:?? 9 [Screen] Updating E-Paper... _PowerOn : 95000
_Update_Part : 738016
_PowerOff : 141001
done
DEBUG | ??:??:?? 10 [cardKB] Using I2C Bus 0 (the first one)
INFO | ??:??:?? 10 [RangeTestModule] Range Test Module - Disabled
DEBUG | ??:??:?? 11 [Screen] Updating E-Paper... _PowerOn : 95001
_Update_Part : 738001
_PowerOff : 141001
done
INFO | ??:??:?? 12 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | ??:??:?? 13 [Screen] Updating E-Paper... _PowerOn : 94998
_Update_Part : 738001
_PowerOff : 141001
done
INFO | ??:??:?? 14 [EnvironmentTelemetryModule] Environment Telemetry: Initializing
INFO | ??:??:?? 14 [EnvironmentTelemetryModule] Init sensor: BME280
[ 14327][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
INFO | ??:??:?? 14 [EnvironmentTelemetryModule] Opened BME280 sensor on i2c bus
INFO | ??:??:?? 15 [Screen] Done with boot screen...
DEBUG | ??:??:?? 15 [Screen] showing standard frames
DEBUG | ??:??:?? 15 [Screen] Module wants a UI Frame
DEBUG | ??:??:?? 15 [Screen] Showing 1 module frames
DEBUG | ??:??:?? 15 [Screen] Total frame count: 104
DEBUG | ??:??:?? 15 [Screen] Added modules. numframes: 1
DEBUG | ??:??:?? 15 [Screen] Finished building frames. numframes: 4
DEBUG | ??:??:?? 15 [Screen] Updating E-Paper... _PowerOn : 95000
_Update_Part : 738000
_PowerOff : 141001
done
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] BME280Sensor::getMetrics
INFO | ??:??:?? 16 [EnvironmentTelemetryModule] (Sending): barometric_pressure=846.312866, current=0.000000, gas_resistance=0.000000, relative_humidity=56.468750, temperature=28.280001, voltage=0.000000
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Initial packet id 1951897493, numPacketId 4294967295
INFO | ??:??:?? 16 [EnvironmentTelemetryModule] Sending packet to mesh
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Update DB node 0xe23dd7a8, rx_time=0, channel=0
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] handleReceived(LOCAL) (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] No modules interested in portnum=67, src=LOCAL
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] localSend to channel 0
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Add packet record (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Expanding short PSK #1
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Using AES128 key!
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] ESP32 crypt fr=e23dd7a8, num=74579797, numBytes=26!
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] enqueuing for send (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] txGood=0,rxGood=0,rxBad=0
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Using channel 0 (hash 0x8)
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Expanding short PSK #1
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] Using AES128 key!
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] ESP32 crypt fr=e23dd7a8, num=74579797, numBytes=26!
DEBUG | ??:??:?? 16 [EnvironmentTelemetryModule] decoded message (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)
DEBUG | ??:??:?? 16 [RadioIf] Starting low level send (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)
DEBUG | ??:??:?? 16 [RadioIf] (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=42, time 550 ms
DEBUG | ??:??:?? 16 [RadioIf] AirTime - Packet transmitted : 550ms
DEBUG | ??:??:?? 17 [RadioIf] Completed sending (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)
DEBUG | ??:??:?? 19 [RadioIf] (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=42, time 550 ms
DEBUG | ??:??:?? 19 [RadioIf] Lora RX (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-13)
DEBUG | ??:??:?? 19 [RadioIf] AirTime - Packet received : 550ms
DEBUG | ??:??:?? 19 [Router] Rx someone rebroadcasting for us (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-13)
DEBUG | ??:??:?? 19 [Router] didn't find pending packet
DEBUG | ??:??:?? 19 [Router] Found existing packet record for fr=0xe23dd7a8,to=0xffffffff,id=0x74579797
DEBUG | ??:??:?? 19 [Router] Found existing packet record for fr=0xe23dd7a8,to=0xffffffff,id=0x74579797
DEBUG | ??:??:?? 19 [Router] Add packet record (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-13)
DEBUG | ??:??:?? 19 [Router] Ignoring incoming msg, because we've already seen it (id=0x74579797 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-13)
DEBUG | ??:??:?? 19 [Router] cancelSending id=0x74579797, removed=0
DEBUG | ??:??:?? 19 [Router] Incoming message was filtered 0xe23dd7a8
DEBUG | ??:??:?? 22 [cardKB] Canned message event Select
DEBUG | ??:??:?? 22 [Screen] Updating E-Paper... _PowerOn : 95000
_Update_Part : 738001
_PowerOff : 141001
done
DEBUG | ??:??:?? 24 [cardKB] Canned message event Select
DEBUG | ??:??:?? 24 [Screen] Updating E-Paper... _PowerOn : 95000
_Update_Part : 739001
_PowerOff : 141001
done
DEBUG | ??:??:?? 29 [Power] Battery: usbPower=0, isCharging=0, batMv=4160, batPct=95
INFO | ??:??:?? 29 [PowerFSM] Loss of power in Powered
DEBUG | ??:??:?? 29 [PowerFSM] Enter state: ON
DEBUG | ??:??:?? 29 [Screen] Screen: Unpowered...
INFO | ??:??:?? 34 [NodeInfoModule] Sending our nodeinfo to mesh (wantReplies=1)
INFO | ??:??:?? 34 [NodeInfoModule] sending owner !e23dd7a8/Meshtastic d7a8/d7a8
DEBUG | ??:??:?? 34 [NodeInfoModule] Update DB node 0xe23dd7a8, rx_time=0, channel=0
DEBUG | ??:??:?? 34 [NodeInfoModule] handleReceived(LOCAL) (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=4 WANTRESP priority=10)
DEBUG | ??:??:?? 34 [NodeInfoModule] No modules interested in portnum=4, src=LOCAL
DEBUG | ??:??:?? 34 [NodeInfoModule] localSend to channel 0
DEBUG | ??:??:?? 34 [NodeInfoModule] Add packet record (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=4 WANTRESP priority=10)
DEBUG | ??:??:?? 34 [NodeInfoModule] Expanding short PSK #1
DEBUG | ??:??:?? 34 [NodeInfoModule] Using AES128 key!
DEBUG | ??:??:?? 34 [NodeInfoModule] ESP32 crypt fr=e23dd7a8, num=74579798, numBytes=51!
DEBUG | ??:??:?? 34 [NodeInfoModule] enqueuing for send (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=10)
DEBUG | ??:??:?? 34 [NodeInfoModule] txGood=1,rxGood=1,rxBad=0
DEBUG | ??:??:?? 34 [RadioIf] Starting low level send (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=10)
DEBUG | ??:??:?? 34 [RadioIf] (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=67, time 731 ms
DEBUG | ??:??:?? 34 [RadioIf] AirTime - Packet transmitted : 731ms
DEBUG | ??:??:?? 35 [RadioIf] Completed sending (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=10)
DEBUG | ??:??:?? 37 [RadioIf] (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=67, time 731 ms
DEBUG | ??:??:?? 37 [RadioIf] Lora RX (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-14)
DEBUG | ??:??:?? 37 [RadioIf] AirTime - Packet received : 731ms
DEBUG | ??:??:?? 37 [Router] Rx someone rebroadcasting for us (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-14)
DEBUG | ??:??:?? 37 [Router] didn't find pending packet
DEBUG | ??:??:?? 37 [Router] Found existing packet record for fr=0xe23dd7a8,to=0xffffffff,id=0x74579798
DEBUG | ??:??:?? 37 [Router] Found existing packet record for fr=0xe23dd7a8,to=0xffffffff,id=0x74579798
DEBUG | ??:??:?? 37 [Router] Add packet record (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-14)
DEBUG | ??:??:?? 37 [Router] Ignoring incoming msg, because we've already seen it (id=0x74579798 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-14)
DEBUG | ??:??:?? 37 [Router] cancelSending id=0x74579798, removed=0
DEBUG | ??:??:?? 37 [Router] Incoming message was filtered 0xe23dd7a8
INFO | ??:??:?? 49 [DeviceTelemetryModule] (Sending): air_util_tx=0.035583, channel_utilization=4.270000, battery_level=95, voltage=4.160000
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] updateTelemetry LOCAL
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Node status update: 2 online, 2 total
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] showing standard frames
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Module wants a UI Frame
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Showing 1 module frames
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Total frame count: 104
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Added modules. numframes: 1
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Finished building frames. numframes: 4
INFO | ??:??:?? 49 [DeviceTelemetryModule] Sending packet to mesh
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Update DB node 0xe23dd7a8, rx_time=0, channel=0
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] handleReceived(LOCAL) (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] No modules interested in portnum=67, src=LOCAL
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] localSend to channel 0
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Add packet record (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Expanding short PSK #1
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Using AES128 key!
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] ESP32 crypt fr=e23dd7a8, num=74579799, numBytes=28!
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] enqueuing for send (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] txGood=2,rxGood=2,rxBad=0
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Using channel 0 (hash 0x8)
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Expanding short PSK #1
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] Using AES128 key!
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] ESP32 crypt fr=e23dd7a8, num=74579799, numBytes=28!
DEBUG | ??:??:?? 49 [DeviceTelemetryModule] decoded message (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)
DEBUG | ??:??:?? 49 [Screen] Updating E-Paper... _PowerOn : 95000
_Update_Part : 738001
_PowerOff : 141001
done
DEBUG | ??:??:?? 50 [Power] Battery: usbPower=0, isCharging=0, batMv=4116, batPct=90
DEBUG | ??:??:?? 50 [RadioIf] Starting low level send (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)
DEBUG | ??:??:?? 50 [RadioIf] (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=44, time 559 ms
DEBUG | ??:??:?? 50 [RadioIf] AirTime - Packet transmitted : 559ms
DEBUG | ??:??:?? 51 [RadioIf] Completed sending (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)
DEBUG | ??:??:?? 54 [RadioIf] (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=44, time 559 ms
DEBUG | ??:??:?? 54 [RadioIf] Lora RX (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-37)
DEBUG | ??:??:?? 54 [RadioIf] AirTime - Packet received : 559ms
DEBUG | ??:??:?? 54 [Router] Rx someone rebroadcasting for us (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-37)
DEBUG | ??:??:?? 54 [Router] didn't find pending packet
DEBUG | ??:??:?? 54 [Router] Found existing packet record for fr=0xe23dd7a8,to=0xffffffff,id=0x74579799
DEBUG | ??:??:?? 54 [Router] Found existing packet record for fr=0xe23dd7a8,to=0xffffffff,id=0x74579799
DEBUG | ??:??:?? 54 [Router] Add packet record (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-37)
DEBUG | ??:??:?? 54 [Router] Ignoring incoming msg, because we've already seen it (id=0x74579799 fr=0xa8 to=0xff, WantAck=0, HopLim=2 Ch=0x8 encrypted rxSNR=6.5 rxRSSI=-37)
DEBUG | ??:??:?? 54 [Router] cancelSending id=0x74579799, removed=0
DEBUG | ??:??:?? 54 [Router] Incoming message was filtered 0xe23dd7a8
DEBUG | ??:??:?? 70 [Power] Battery: usbPower=0, isCharging=0, batMv=4147, batPct=94
DEBUG | ??:??:?? 90 [Power] Battery: usbPower=0, isCharging=0, batMv=4169, batPct=96
DEBUG | ??:??:?? 110 [Power] Battery: usbPower=0, isCharging=0, batMv=4123, batPct=91
DEBUG | ??:??:?? 130 [Power] Battery: usbPower=1, isCharging=1, batMv=4250, batPct=0
DEBUG | ??:??:?? 130 [Screen] Screen: Powered...
DEBUG | ??:??:?? 150 [Power] Battery: usbPower=0, isCharging=0, batMv=4172, batPct=96
INFO | ??:??:?? 150 [PowerFSM] Loss of power in Powered
DEBUG | ??:??:?? 150 [PowerFSM] Enter state: ON
DEBUG | ??:??:?? 150 [Screen] Screen: Unpowered...
DEBUG | ??:??:?? 170 [Power] Battery: usbPower=0, isCharging=0, batMv=4160, batPct=95
Requires
SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN, Choice Of Frequency Band
2.9inch E-Paper E-Ink Display Module for Raspberry Pi Pico, 296×128, Black / White, SPI
Wired by external cable since GPIO conflict with MISO pin of LoRa HAT
or