Hi! I’m just starting using Meshtastic. I’m using a TTGO LoRa v2 1 1,6 and when I try to build meshtastic device on the board enviroment, while compiling PowerFSM.cpp the class State and Fsm imported from Fsm.h seems to have problems.
What may I be doing wrong?
Thank u!
1 Like
Hmm. Can you paste the error message?
Also this might help:
# Build instructions
This project uses the simple PlatformIO build system. PlatformIO is an extension to Microsoft VSCode.
## GUI
1. Purchase a suitable [radio](https://github.com/meshtastic/Meshtastic-device/wiki/Hardware-Information).
2. Install [Python](https://www.python.org/downloads/).
3. Install [Git](https://git-scm.com/downloads).
4. Reboot your computer.
5. Install [PlatformIO](https://platformio.org/platformio-ide).
6. Click the PlatformIO icon on the side bar. ![platformio icon](https://user-images.githubusercontent.com/47490997/89482668-77c7ea00-d7ee-11ea-8785-5faf8ff99800.png)
7. Under `Quick Access, Miscellaneous, Clone Git Project` enter the URL of the Meshtastic repo found [here](https://github.com/meshtastic/Meshtastic-device). ![image](https://user-images.githubusercontent.com/47490997/89483047-4c91ca80-d7ef-11ea-91f4-1d53d4e8acd9.png)
8. Select a file location to save the repo.
9. Once loaded, open the `platformio.ini` file.
10. At the line `default_envs` you can change it to the board type you are building for ie. `tlora-v2, tlora-v1, tlora-v2-1-1.6, tbeam, heltec, tbeam0.7` (boards are listed further down in the file).
11. The hardware can be configured for different countries by adding a definition to the `configuration.h` file. `#define HW_VERSION_US` or `HW_VERSION_EU433, HW_VERSION_EU865, HW_VERSION_CN, HW_VERSION_JP`. Other country settings can be found in `MeshRadio.h`. The default is `HW_VERSION_US`.
12. Click the PlatformIO icon on the side bar. Under `Project Tasks` you can now build or upload.
Note - To get a clean build you may have to delete the auto-generated file `./.vscode/c_cpp_properties.json`, close and re-open Visual Studio and WAIT until the file is auto-generated before compiling again.
This file has been truncated. show original
2 Likes
Thank u! I did not clone the project direct in VStudio. Now everything works.
1 Like