New device alpha 1.2.44 lots of good fixes (particularly for nrf52)

[ksamson]

I do not know if it directly relates, but there is a persistent gps config…

Gps does not work in my application after installing Mestastic

If Meshtastic disables NMEA then you will get nothing out of the serial port. UBX requires polling for information. The link in my first reply contains an Arduino sketch that allows serial pass through to the GPS. You can then factory reset with U Center. This would test the theory that there is a GPS config issue and you could then implement a factory reset or re configuration within your software so it is not an issue in the future. I’ve changed the sketch for the v07 version. I think this s…