I am testing communication between 2xTTGOàLoRa32-V1 of mine with firmware 865EU 1.1.33. It happens that they see each other and indicate reciprocal signal strength % and mutual bearing and distance. I then move away from the node left still in its position expecting the signal % to decrease as I proceed far and far from starting point, it happens instead that the signal % value doesn’t change and stays fix just reporting the very initial value (i.e.:99%) despite the bigger distance shown. I tried also to switch on the moving node at a initial distance of 30mt from the other and noticed correct bearing and distance but signal at 0% all the way till 500mt of walking distance where communication was lost.
We’re tracking something similar in this bug:
I’d bet that it’s related.
1 Like
The issue is similar actually but in addition my testing showed no change in signal strength even though the distance between the two nodes changes very much.
1 Like