Hey all, I just got an H2T from Muzi.works with the new heltec t114. It worked for a few minutes when I first turned it on but after disconnecting and reconnecting to Bluetooth it is in a connecting/disconnected/connecting loop. I’ve tried factory resetting it, and trying different firmware but no luck. I’m on the latest stable firmware. Here’s my logs:
Edit to add: this only happens when I set the region to US. Before I set the region everything works fine and I am connected via BLE.
see also Problems with Heltec T144
I had the same issues when i installed the 2200mAh battery included with the case. I used a 1200mAh battery from muzi.works that I had purchased previously, and all is working normally now.
I lied, it’s back to the repeated quick disconnects of bluetooth.
Through my troubleshooting, it seems to be an issue with the placement of the GPS module in the case. If you move the gps module from the slot designed for it, or unplug it, the unit works normally. Once the GPS is replaced into its designed slot, the disconnections begin again.
Unplugging the GPS module didn’t fix the issue for me 
Unit worked just fine overnight, but back to the bluetooth disconnections in the morning. Looks like I may have to go back to a makeshift case until a fix is found.
Same issue here when paired to a Pixel 3. Seems to disconnect every time the unit transmits on LoRa
In had the same correlation. Immediately after a traceroute - off. The Muzi Works vendor is working on it apparently.
