AXP192 power management IC issues

[Havealoha]

Try probing both sides of the board at the 5v hole.

Check these out OLED problem on T-beam boards

AXP192 Fail and i2C not working - Bad Soldering

First off I would like to say how awesome I find this project and group. T-Beam V1.1 w/ NEO-6M I made a big mistake when connecting the OLED display to the board and shifted my pins over one and it appears that I must have shorted either the power or i2c bus (or both). In trying to take them off I also messed up the 3.3V pin in the desoldering process. Things that aren’t working: AXP192 - Not recognized as an i2c device OLED display - Not recognized as an i2c device (I attempted to power t…