Anyone using the Lilygo SX1280 2.4G LoRa?

1

Anyone using the:

LILYGO® T3S3 V1.0 ESP32-S3 LoRa SX1280 2.4G Development Board WiFi Bluetooth Wireless Module 0.96 Inch OLED Display Type-C

Does loading/configuring the firmware for ‘US’ know to use the 2.4Ghz ?

2

There is a region for 2.4 GHz, it is worldwide

3

Hi if you guys can get back to me, how is it possible to connect LILYGO® T3S3 V1.0 ESP32-S3 LoRa SX1280 2.4G Development Board to rak gateway and subsequently to my chirpstack and thingsboard server as my rak gateway is used as a packet forwarder.

4

Does the rak gateway and thingsboard server support the SX1280 LoRa devices ?

5

Hello, i dont think my gateway supports the rak gateway as mine is rak7268 and it does not support sx1280. Thanks for helping me to understand that. Is there any code guide on how to programme “LILYGO® T3S3 V1.0 ESP32-S3 LoRa SX1280 2.4G Development Board” this specific board?

6

Dont know if SX1280 is supported by Meshtastic.

There are a few point to point Arduino libraies that support the SX1280.

7

Yes, the SX1280 is supported. For that board you can flash “T-LoRa T3-S3” in the Web Flasher and select the LORA_24 region.