Heltec T-190 not recognized by web flasher

Support
1

My Heltec Vision Master T190 will not connect to the flasher.

The serial link is always active in Device Manager when the T190 is attached via USB.
The web flasher does not activate the “Flash” button when the T190 and the current firmware is selected. (or any of the options in the drop down)

But, if I select HT62 for example, and 2.41 beta, the “flash” button turns green and works. The flasher goes through the usual process and completes. But it’s the HT62 FW so no good.
Not expecting it to work. Just confirming that the Web Flasher page can comm. with the board. no problem.

I have successfully flashed 25 units, several models. Heltec V3 & Paper, Tdecks & Tbeam also Station G2’s

Any ideas?

2

Looks like there’s a bug in the flasher - should be fixed soon.