Heltec HT-M00 Dual Channel LoRa Gateway

Has anyone had a look at the Heltec HT-M00. It is described as a Dual Channel LoRa Gateway. Is based on the ESP32 chip, has an SX1276 LoRa chip, CP2102 usb-serial chip for program download.
I have not got a hold of one yet, but plan to. Was hoping someone would know if it is compatible with Meshtastic, or not.

3 Likes

That looks like an application specific device, made for homes with LoraWAN networks. Nice enclosure!

HT-M00 is a small, low-cost dual-channel LoRa gateway with Type-C interface. The main function of HT-M00 is to provide a LoRaWAN network for large houses of 1500 to 2000 square meters, or to make up for signal blind spots in areas that cannot be covered by SX1301 gateway signals.

  • Drive SX1276 chip by ESP32;
  • Software mixer (baseband simulation program) to monitor the 125KHz SF7~SF12 spreading factor;
  • Support LoRaWAN protocol 1.0.2 Class A, Class C;
  • Built-in antenna;
  • Onboard display.
1 Like