Gross Timeout Dead start=0x44673, end=0x44673

I set my Heltec up to keep Bluetooth on than sent it up with my quadcopter low enough to keep BLE connection so i though than went for a drive, i get this message. I have a tlora-v2-1 in the office running meshtastic --reply and im driving around with a Tbeam 1. trying to see some mesh action multiple hops, but only ever get one hop. does this have anything to do with that?

[D][esp32-hal-i2c.c:1345] i2cProcQueue():  Gross Timeout Dead start=0x44673, end=0x44673, =0, max=50 error=1
[E][esp32-hal-i2c.c:318] i2cDumpI2c(): i2c=0x3ffbe054
[I][esp32-hal-i2c.c:319] i2cDumpI2c(): dev=0x60013000 date=0x16042000
[I][esp32-hal-i2c.c:321] i2cDumpI2c(): lock=0x3ffbb228
[I][esp32-hal-i2c.c:323] i2cDumpI2c(): num=0
[I][esp32-hal-i2c.c:324] i2cDumpI2c(): mode=1
[I][esp32-hal-i2c.c:325] i2cDumpI2c(): stage=3
[I][esp32-hal-i2c.c:326] i2cDumpI2c(): error=1
[I][esp32-hal-i2c.c:327] i2cDumpI2c(): event=0x3ffbaf1c bits=10
[I][esp32-hal-i2c.c:328] i2cDumpI2c(): intr_handle=0x3ffbb288
[I][esp32-hal-i2c.c:329] i2cDumpI2c(): dq=0x3ffb28b8
[I][esp32-hal-i2c.c:330] i2cDumpI2c(): queueCount=1
[I][esp32-hal-i2c.c:331] i2cDumpI2c(): queuePos=0
[I][esp32-hal-i2c.c:332] i2cDumpI2c(): errorByteCnt=2
[I][esp32-hal-i2c.c:333] i2cDumpI2c(): errorQueue=0
[I][esp32-hal-i2c.c:334] i2cDumpI2c(): debugFlags=0x00000000
[I][esp32-hal-i2c.c:311] i2cDumpDqData(): Debug Buffer not Enabled
[I][esp32-hal-i2c.c:354] i2cDumpInts(): Debug Buffer not Enabled
WARNING:root:Node not found for fromId
Received: {'from': 2988082472, 'to': 4294967295, 'decoded': {'data': {'typ': 'CLEAR_TEXT', 'payload': 'c2hpdA==', 'text': 'shit'}}, 'id': 2810268538, 'rxSnr': 9.5, 'rxTime': 1605546473, 'hopLimit': 1, 'fromId': None, 'toId': '^all'}
message: shit
Sending reply:  got msg 'sh*t' with rxSnr: 9.5 and hopLimit: 1
Trigger powerFSM 9
Trigger powerFSM 5
Transition powerFSM transition=Received text, from=ON to=ON
Trigger powerFSM 3

also get this error. i would have put it in the same but i think it would have been to much to post in one. if you need more let me know i saved it … all this was happening while i was driving i wasn’t in font of the PC to know Zactly when it happened

Guru Meditation Error: Core  1 panic'ed (LoadProhibited). Exception was unhandled. 
Core 1 register dump:
PC      : 0x400e4692  PS      : 0x00060d30  A0      : 0x800e4719  A1      : 0x3ffd1370  
A2      : 0x3ffbba88  A3      : 0x00000022  A4      : 0x00000022  A5      : 0x000000d2  
A6      : 0x000000fe  A7      : 0x00000001  A8      : 0x3ffbbae6  A9      : 0x3ffd1350  
A10     : 0x00000022  A11     : 0x00000000  A12     : 0x3ffd1540  A13     : 0x00000000  
A14     : 0x3ffd1b2b  A15     : 0x00000000  SAR     : 0x00000014  EXCCAUSE: 0x0000001c  
EXCVADDR: 0x0000004a  LBEG    : 0x4000c28c  LEND    : 0x4000c296  LCOUNT  : 0x00000000  

ELF file SHA256: 0000000000000000

Backtrace: 0x400e4692:0x3ffd1370 0x400e4716:0x3ffd1390 0x400d58a1:0x3ffd13b0 0x400d563f:0x3ffd13d0 0x400d4722:0x3ffd13f0 0x400e4929:0x3ffd1410 0x400d8fe3:0x3ffd1440 0x400f1e29:0x3ffd1460

Rebooting..

Ooh that stack trace it is super useful. So I can decode it can you provide the exact build that was flashed onto it? Ie. Tlora xxx, region yyy, version zzz?

Yes of course sorry i didn’t put that to began with. The module connected running the API was firmware-tlora-v2-1-1.6-US-1.1.8.bin with GPS installed.

ok thanks - the bug seems to be: