Build Log of My Solar Nodes

I am finishing up 3 nodes and plan to deploy next week.

This is a quick Buildout of my Solar Node Builds. here is my Materials, Links, and options in case you wanted to duplicate the setup.

Rakwireless Solar Node Build

RakWireless Wisblock Kit
-Rak Wireless - ($24.99 + Shipping) Meshtastic Starter Kit for LoRa – RAKwireless Store
-Rokland - ($36.97 Free Shipping) RAK Wireless WisBlock Meshtastic Starter Kit US915-- PREORDER FOR EARL – Rokland
-Aliexpress - ($28.86 + $14.74 Shipping) 404 page

Solar Panel - ($12.99) https://www.amazon.com/dp/B099RSLNZ4?ref=ppx_yo2ov_dt_b_product_details&th=1

Project Box - ($9.99) https://a.co/d/62ClUFU

Angled Block Mount - $8 Each(15.99 for 2) https://a.co/d/h25GR8k

Battery holder - $1.66 Each($9.99 for 6) https://a.co/d/hDHnI5w

Protection Board for 18650 - $1.40 Each (7$ for 5) https://a.co/d/8OocWVT

Waterproof SMA to IPX - $4.50 Each ($8.99 for 2) https://a.co/d/fVC4AJc

Type N to SMA adapter - $7.26 Each ($14.59 for 2) https://a.co/d/aNvzPKz

Optional J Pole for Mounting on house - ($17.99) https://a.co/d/4pXKVSW

3d Printed Carrier Plate - (I made this to have an integrated single 18650 or blank so you can put a double carrier spec’d out above) - ($0.20 filament) Rak Wireless Wisblock 19007 and 18650 Holder for Electrical Box Case by Hamspiced - Thingiverse

6DB Type N Antenna - (Search FB Marketplace for this item. you can get it for 20$ just search 915mhz helium Antenna) (Amazon 39$) - https://a.co/d/5fNIYxd

Total Cost per Solar Node - (If you choose your own antenna and dont need N-Type or the J pole and angle mount subtract $58.50) -

$120.76 Per Solar Node

$62.26 without Antenna and J Pole and Angle mount

2 Likes

The link to your project box is incorrect. Link is the same as for Waterproof SMA to IPX. What is the correct link?

73 Lee NC4LM

Should be updated now.

Additional pictures



What size screws to mount the 3d printed plate to the project box?

Super useful info. Could you post a few more photos of the mechanical mounting arrangement. I cannot tell from the pictures what is attached to what. Is/are the device/s mounted to a wall or to a post? Thanks.